Zhengzhou Shen Long Pump Co., Ltd.
Main products:submersible pumps,centrifugal pump,deep well pump,sewage pump,chemical pump
Products
Contact Us
  • Contact Person : Ms. Tian Chuang
  • Company Name : Zhengzhou Shen Long Pump Co., Ltd.
  • Tel : 86-0371-64606679
  • Fax : 86-0371-64606679
  • Address : Henan,Zhengzhou,Gaocunsi, Gaocun Xiang
  • Country/Region : China
  • Zip : 450100

6inch Deep Well Water Pumps /150QJ20-72(ISO9001)

6inch Deep Well Water Pumps /150QJ20-72(ISO9001)
Product Detailed
Deep Well Water Pumps 1.pump power:7.5kw 2.stock for sale 3.pump vertical head from 67m to 77m 4.multistage impeller

6inch Deep Well Water Pumps /150QJ20-72(ISO9001) 

1.  Operation parameters :

 (1). Flow range : 3.2~500 m3/h

 (2). Lift range : 10~600m

 (3). Applicable well Borehole diameter : φ100~φ400mm

 (4).Diameter scope:φ32~φ203mm;   

 (5).Temperature range: -15~80 centidegree.

2.  Product application :

 QJ submersible deep well water pumps are widely used in agriculture irrigation, sprinkler irrigation, well water lifting and water supply, drain system of industrial and civil building, as well as the hill, mountain areas' water diversion, drainage of lowlying area, water supply, drainage of industrial and mining enterprises in urban and rural area and all the other water facilities. 

3.  Technical parameters

  

4.  QJ deep well water pump using condition 

(1).  380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.

(2).  Motor cavity must be filled with water.

(3).  The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.

(4).  The distance from the motor bottom to well bottom must be more than 3m.

(5).  Water temperature should be no more than 20 centidegree.

(6).  Sand content of the water ( by mass) should be no more than 0.01%.

(7).  PH value of water 6.5~8.5.

(8).  Hydrogen sulfide content of the water should be no more than 1.5mg/L.            

(9).  Chloride ion content of the water should be no more than 400mg/L.

(10).  Water yield of water source should ensure the requirements of pump continuous working.

5.  Characteristics

  (1).  Motors and pumps assembled into one. 

  (2).  Simple structure.

  (3).  Easy installation and removal, small area.

  (4).  Simple using and maintenance.

  (5).  Safe and reliable operation, no pollution to water, etc.

6.Material:

Impeller:Cast iron HT200,or tin bronze,such as ZCuSn3Zn8Pb6Ni1

Pump bowl:Cast iron HT200,or stainless steel,such as 2Gr13.304

Pump shaft :Cold-drawn steel with chrome plating,or stainless steel 2Gr13(1050 thermal refining ,enhancent  torsional moment)

Motor Seal:Rubber O-ring seal,mechanical seal

Motor regulating sleeve:rubber

7.Introduction

The deep well water pump unit is composed of the motor and pump together which is placed in the bore well by connecting the motor cable with the power supply which drives the impeller rotating.it is simple and small light-weight structure easy to maintain.it runs in a good condition and performs well.

This is new highly efficient machine and low cost for water supply.It can be used for drainage in mines,a city's water supply,clean water and irrigation and portable water and animals areas lacking water.

8.Structure feature

 pump:The pump is installed on the upper part of the pump units.It's centrifugal and has water lubricated bearing mounted with the motor shaft by a joint.

There is a check valve on top of the pump which could prevent rapaid inverse rotation from backword flow.The pump unit should be immersed below the dynamic water lever when in using.

motor:The motor is installed under the pump.

It is a water filled in hermatical structure.The stator windings are water-tight and PE insulating and multi-layers are covered with nylon.

The motor bearing is water-lubricated.The inner motor contains clean water to cool the water body and the bearing.

The rubber diaphgram adjusts the pressure change caused when temperature rises.

There is a sand resistance system in the upper part of the motor.

6inch Deep Well Water Pumps /150QJ20-72(ISO9001)



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.